서울대학교 빅데이터 지식정보플랫폼
전체 메뉴
AI 검색
최근 확인한 콘텐츠
1건 더보기
loading...
반출리포트 생성
논문 목록
Microstructure and Mechanical Properties of Al-Si-Mg Alloys Fabricated by Twin Roll Casting and Subsequent Symmetric and Asymmetric Rolling
저자
Jae
학술지명
Metals and Materials International
출판/발행연도
2014
주제
요약
본 연구는 쌍롤 주조 후 대칭 및 비대칭 압연을 통해 제조된 알루미늄-규소-마그네슘 합금의 미세구조 및 기계적 특성을 조사했습니다. 비대칭 압연 시 전단 변형이 두께 방향으로 침투하여 회전 큐브 텍스처가 강하게 발달했으며, 이는 재결정립 후 {356}aEuro(1)0 17 14aEuro(0) 성분으로 변환되었습니다. 대칭 압연된 시트는 약화된 랜덤 텍스처로 인해 강도와 연신율의 균형 잡힌 평면 등방성 값을 나타냈습니다.
연관 콘텐츠
LikeSNU에서 의미기반으로 분석하여 연관된 자료를 추천해드립니다.
-
Properties of complex inorganic solids 2
-
Science and technology of the undercooled melt : rapid solidification materials and technologies
-
Science and technology of rapid solidification and processing
-
Magnesium technology 2013 : proceedings of a symposium sponsored by the Magnesium Committee of the Light Metals Division of the Minerals, Metals & Materials Society (TMS), held during TMS 2013 Annual Meeting & Exhibition, San Antonio, Texas, USA, March 3-7, 2013
-
IUTAM Symposium on Microstructure-Property Interactions in Composite Materials : proceedings of the IUTAM Symposium held in Aalborg, Denmark, 22-25 August 1994
-
Nanostructured metals and alloys : processing, microstructure, mechanical poperties and applications
-
Physical foundations of material science
-
Metallurgical design of flat rolled steels
-
Polyurethane elastomers : from morphology to mechanical aspects
-
Encyclopedia of Aluminum and Its Alloys, Two-Volume Set
-
IUTAM Symposium on Mesoscopic Dynamics of Fracture Process and Materials Strength : proceedings of the IUTAM symposium held in Osaka, Japan, 6-11 July, 2003 : volume in celebration of Professor Kitagawa's retirement
-
Advanced light alloys and composites : : edited by R. Ciach.
-
Advances in wrought magnesium alloys : fundamentals of processing, properties and applications
-
Texture and related phenomena
-
Magnesium technology 2016 : Proceedings of a symposium sponsored by magnesium Committee of the Light Metals Division of The Minerals, Metals & Materials Society (TMS) held during TMS2016 145th Annual Meeting & Exhibition February 14-18 Downtown Nashville, Teeneessee Music City Center
-
IUTAM Symposium on Micromechanics of Plasticity and Damage of Multiphase Materials : proceedings of the IUTAM Symposium held in S?vres, Paris, France, 29 August -1 September 1995
-
Crystallographic texture of materials
-
Inelasticity and micromechanics of metal matrix composites
-
Precipitation hardening
-
Advances in friction stir welding and processing
이전
다음
이전
다음
이전
다음