서울대학교 빅데이터 지식정보플랫폼
전체 메뉴
AI 검색
최근 확인한 콘텐츠
3건 더보기
loading...
반출리포트 생성
논문 목록
재활용 스크랩 함유 Al-Si-Cu계 합금의 주조특성에 미치는 결정립 미세화제와 공정 Si 개량화제의 영향
저자
성동현, 김헌주
학술지명
한국주조공학회지
출판/발행연도
2018
주제
요약
본 연구는 재활용 스크랩 35%를 함유한 AC2BS 알루미늄 합금의 주조성을 개선하기 위해 첨가제의 효과를 조사했습니다. Ti-B 첨가는 결정립 미세화를, Sr 첨가는 공정 Si 형상 개선에 기여하며, 이는 유동성 향상으로 이어졌습니다. TiB 및 Sr 처리를 통해 재활용 스크랩을 함유한 AC2BS 합금의 주조 특성이 순수 AC2B 합금과 유사하게 개선되었습니다.
연관 콘텐츠
LikeSNU에서 의미기반으로 분석하여 연관된 자료를 추천해드립니다.
-
Advanced light alloys and composites : : edited by R. Ciach.
-
Encyclopedia of Aluminum and Its Alloys, Two-Volume Set
-
Science and technology of rapid solidification and processing
-
Science and technology of the undercooled melt : rapid solidification materials and technologies
-
Advanced Composites in Aerospace Engineering Applications
-
Increasing the leaching rate of bulk superalloy scrap by melting with aluminum
-
Effects of Al additions on sulfidation resistance of some Fe-Cr-Ni alloys
-
TMS 2012 141st annual meeting & exhibition : supplemental proceedings.
-
Magnesium technology 2013 : proceedings of a symposium sponsored by the Magnesium Committee of the Light Metals Division of the Minerals, Metals & Materials Society (TMS), held during TMS 2013 Annual Meeting & Exhibition, San Antonio, Texas, USA, March 3-7, 2013
-
Friction stir processing for enhanced low temperature formability
-
Advanced materials '93 : proceedings of the Symposia ... of the 3rd IUMRS International Conference on Advanced Materials, Sunshine City, Ikebukuro, Tokyo, Japan, August 31-September 4, 1993.
-
Handbook of alkali-activated cements, mortars and concretes
-
Creep and other properties of extruded zinc-30 percent aluminum alloys containing magnesium
-
Improvement of a commercial hypereutectic aluminum-silicon master alloy
-
Materials selection for design and manufacturing : theory and practice
-
Characterization of minerals, metals, and materials 2016 : proceedings of a symposium sponsored by the Materials Characterization Committee of the extraction and processing division of The Minerals, Metals, & Materials Society (TMS), held during TMS 2016 145th Annual Meeting & Exhibition, Nashville, Tennessee, February 14-18, 2016
-
Advanced composites for aerospace, marine, and land applications : proceedings of a symposium sponsored by The Minerals, Metals ＆ Materials Society (TMS) held during TMS2014, 143rd Annual Meeting ＆ Exhibition, February 16-20, 2014, San Diego Convention Center, San Diego, California, USA
-
Effects of turbomilling parameters on the comminution of [alpha]-SiC
-
Microstructure, methods, design, and fatigue
-
Thermodynamic properties of the Al-Ni system
이전
다음
이전
다음
이전
다음